EQUIPEMENTS Pro

MANUAL HYDRAULIC PUNCHING MACHINE

Article N°: 1731

Supplier: ALFRA

Type: Akku Compact Flex

Status: 6.0 New

Remarks:
Convenient manual hydraulic system with 18 V high-power battery for
punching round, square and rectangular holes in construction
electrical cabinets and control panels.
Extremely practical and light thanks to the very resistant aluminum head.

Lightweight and practical, only 2.5 kg with battery cell.
With pressure relief valve.
High power drive motor with ergonomic "Softtouch" handle.
The battery cells can be inserted from two sides, so as to balance the weight.
Technical data:

Punching
Round hole:
up to 82 mm Ø
3.0 mm normal steel (S235)
2.0 mm stainless steel (F = 600 N / mm2)
89 - 120 mm Ø only with special screw * and spacer sleeve *
2.0 mm normal steel (S235)
1.5 mm stainless steel (F = 600 N / mm2)
Special shaped hole:
68 x 68 mm
3.0 mm normal steel (S235)
2.0 mm stainless steel (F = 600 N / mm2)
92 x 92 mm only with special screw * and spacer sleeve *
2.0 mm normal steel (S235)
1.5 mm stainless steel (F = 600 N / mm2)

Transmission
Punching force 75 kN with pressure relief valve

Battery
18 V, 1.5 Ah LION
Charging time 45 min. after complete unloading
~ 500 charge cycles under normal conditions
Use 0 ° to + 40 ° C, loss of capacity below 0 ° C

Charger
Charges all 18 - 28 V batteries, compatible with NiCD, NiMH and
lithium-ion. Automatic temperature monitoring. Switching between
fast charge and trickle charge prevent overcharging of cells
battery. The state of charge is indicated by an LED display.
The plate is fully recessed.

Punching time / punching power
Ø 22.5 mm 2 mm normal steel (S235): 5 sec. 190 holes / battery
Ø 63.5 mm 2 mm normal steel (S235): 7 sec. 100 holes / battery
68 x 68 mm 2 mm normal steel (S235): 7 sec. 70 holes / battery

Weight
2.5 kg with battery

Scope of delivery:
Compact Flex hydraulic manual punching machine with battery ALFRA
with 1 18 V battery, 18 - 28 V charger
Hydraulic screw - 9.5 x 19 mm - Art. n °: 02003
Hydraulic screw - 19 x 120 mm - Art. n °: 02002
Spacer sleeve set (3 pieces) - Art. n °: 02004
Pre-drill 11 mm Ø - Art. n °: 08023
in a sturdy and practical plastic case

Selling price/pce: 2'290.00 CHF excl tax